Growing a Gingko Tree from Seed and Beyond

Have you ever been driving through a neighborhood and noticed a stunningly brilliant yellow tree with distinctive fan-shaped leaves? Or maybe you have heard of taking gingko biloba supplements for helping various ailments. Well that is what happened to me and so I started looking into what kind of a tree it was and if I could plant it on our property. But that was years ago and I never acted on getting seedlings or seeds until the fall of 2023.

I was taking a walk in a neighboring town and noticed a small fruit on the ground along the curb of a street. Since the size and shape reminded me of a small apricot I was curious what it might be but before I could touch it, the rank smell reminded me of my previous research on the Gingko tree and that the seeds should not be touched with bare hands. I picked it up with a napkin and looked around for the mother tree. Sure enough, about 20 feet away was a female Gingko tree covered in the orange fruit and plenty of droppings for me to grab. 

So to start, this is how you can grow a Gingko tree from seed.

-Harvest ripe dropped seeds in the early fall.

-Place them in a clean bucket and covered them with water for around three weeks. Keep them away from your house as the smell is horrendous

-Drain the seeds and put on rubber gloves. Separate the fleshy covering from the seed underneath and then rinse with fresh water.

-Place the seeds in a damp paper towel or cloth and then in a plastic bag or container. Keep them in a dark cool (40-55 degrees F) place for the next 6 months. Check every few weeks to make sure the towel or cloth is still damp, but not wet.

-Remove the sprouted seeds in the spring and plant in a gallon pot filled with regular potting soil, being careful not to damage the small root. Set them in a sheltered place outside and water as needed to keep the soil damp.

-Once the seedling is about 8-12 inches tall in the summer, you can transplant the young tree to a permanent spot where it can grow at least 10 feet from any other trees or shrubs. Full sun is best but the tree will also grow just fine in partial sunlight.

-Water the tree every few days or as needed through the summer so the young roots don't dry out.

-For the tree to bear fruit, you will need at least one male and one female but since you don't know which is which until several years have passed, predicting what you have is a bit of a gamble. 

You can also grow these as a bonsai in a pot if you are not in the growing zones 3-9.

The roots are not invasive as they grow deep and so they make great neighborhood trees along sidewalks or small backyards.

If you don't have access to a neighborhood tree for the seeds, I do have several seedlings for sale on my page on Etsy here: Gingko biloba seedlings.

How to Root Red Mulberry Tree Cuttings

Sidewalk covered in Mulberries

One of the fun and nostalgic rites of summer is the arrival of the ripe red mulberries as they first show up dropping their fruit onto the sidewalks and driveways of our town. I am sure they are dropping their fruit onto the lawns and fields, but you never notice them until suddenly you are walking over them and you look up to see the dark fruit hanging in masses above your head. Unlike a lot of other dark berries, mulberries won't stain your fingers, so you don't have to be so careful as you stuff handfuls into your mouth. 

You might assume that the common mulberries growing along the eastern United States are black mulberries since the berries go from white to red to black when they ripen. However the black mulberry (Morus nigra) is a different cultivar native to Southwest Asia. I am speaking of the Morus Rubra, a North America native mulberry that grows along the East Coast from USDA growing zone 3 through 8. We have several trees that grow on our property and harvesting cuttings is a fun way to propagate the trees. Many times, I will forget to label the pots and as they go dormant in winter, I can always tell it's a mulberry by the tree's orange roots. This tree likes to grow in floodplains and spreads its roots in a large network within the top 24 inches of soil, collecting nutrients and moisture and at the same time making it a very sturdy tree. 

Here is how I like to root my red mulberry cuttings:

• Take cuttings from the newest growth that is almost as thick as a pencil. Immediately after cutting, place the bottom into a container of water so that there is no chance of the cut drying out. I use an angled cut on the bottom about a 1/4-inch below a node and a straight cut across the top of a 6 to 8 inch section, also about 1/4-inch above a node. Take several cuttings at a time to increase your chances of success.
• Prepare a rooting container by filling it with 4 - 6 inches of a dampened mixture of vermiculite and coconut coir or something similar with good drainage. Poke holes with a pencil sized instrument.
• Dip your cutting into a rooting hormone (optional) and then into the prepared holes. Keep at least one node above the soil line. Press the soil firmly around each cutting making sure the bark has good contact. 
• Cover the cuttings with a cloche or translucent bag to keep the humidity levels high around the cuttings. Open the covering every 7 to 14 days to freshen the air and prevent mold and fungal growth.
• Place the covered cuttings in a shady but warm (65 to 75 F) place for 6 to 8 weeks or until you see signs of growth. Make sure the soil never dries out or you will most likely have dead cuttings as the fragile new roots dry out very easily.

• When leaves appear, remove the coverings and mist lightly every few days and check for root growth. I like to use translucent containers so I can see the roots as they develop.
• Transfer into individual containers filled with potting soil when you see roots and continue to moisten every few days until you see vigorous growth.
• Your new red mulberry tree is now ready to be planted in a sunny spot that gets at least 6 to 8 hours of sunlight every day. Continue to water for the first year when you notice the soil is dry. I do not fertilize young trees as I want to encourage root growth to find its own nutrients and water away from the planting site.

If you don't have access to a mulberry tree for cuttings, you can always check here: 

https://wildflowerrun.etsy.com/listing/1218131545.

Rooting Green Gooseberry Bushes from Hardwood Cuttings

Green gooseberries are a common type of berry from the large family of Ribes. My first encounter with them was when I was a child in Washington state visiting a friend of the family. He had long rows of gooseberry plants along with blackberries and raspberries growing in his backyard. The gooseberries were so beautiful in the sunlight as the light passed through their translucent skin. I must have happened to visit just as they were ripe as I remember the flavor to be be tart but sweet. Years later, one of my daughters bought me my own gooseberry plant. Since I live in the hot and humid climate of the Eastern Seaboard of the United States, growing the gooseberries was a little harder. However, I have found a spot where it receives about 6 hours of sunlight per day and some shade during the hot afternoon hours.

Now, since I know that I can root my red currant bushes pretty simply, I found with a little research that gooseberry bushes are also easy to propagate with cuttings. 

Gooseberry Bush

First you are going to need a plant pot filled with equal parts of dampened coconut coir and vermiculite or something similar. Press the mixture firmly into the pot with the heel of your palm. Poke a hole into the firmed mixture with a wooden dowel or pencil or screwdriver. The depth of the hole should be enough to leave just one leaf node showing after planting.

Now take your cutting and inspect it after rinsing it. The bottom angled cut should be green and not dried out. Scrape a little section of bark from about an inch or two from the bottom on one side of the cutting. Dip the cutting immediately into some rooting hormone and then into the prepared pot. Repeat for other cuttings. An 8-inch pot can hold 6-8 cuttings. Press the soil firmly around the cuttings to make sure the cutting has good contact with the damp rooting mixture. Water lightly.

Place a cover like a plastic bag or a glass jar or cloche over the cuttings to hold moisture around the stems.

Fancy Plant Cloche

And now comes the hard part - waiting.  You will feel like an eternity has passed before you see a little root coming out from the bottom of the pot. Make sure that you check the cutting at least once a week to open the cover and let fresh air in. You can also check the moisture of the soil and add a little water if you think it feels dry.

I keep my cuttings out of direct sunlight in a unheated greenhouse over the winter. 

Expect the gooseberry bush cuttings to take 3-4 months to root.

Once you see the roots emerging from the bottom of the plant pot, carefully repot each rooted cutting into its own pot and water. Keep the cutting covered until you see leaves forming. Once the rooted cutting has formed leaves, you can move it outside to a permanent setting either in a large pot or in the ground. 

Plant outside in permanent position

That is how you grow green gooseberries from cuttings. Once your bush has grown over a couple of years, you can repeat the process and multiply your harvest simply with cuttings.

You can make a tart gooseberry jam with any berries left over from eating fresh. I like combining raspberries with gooseberries to make a beautiful and tasty jam.

Gooseberry jam

If you need to find a source for fresh cuttings, you can check out my Etsy shop, here: https://www.etsy.com/shop/wildflowerrun, or scan here:

WildflowerRun